Ø 1/2.8 inch 5 million pixel CMOS sensor; 2.07 million effective pixels (1920X1080)

Ø Video signal: 1080P60/50/30/25, 1080I 60/50, 720P60/50/30; definition ≥1000TVL TV line

Ø Lens: 20x optical zoom, f=5.5～110mm, 10x digital zoom

Ø Viewing angle: 3.3° (narrow angle)-54.7° (wide angle), aperture F1.6–F3.5

Ø Support SM-2D and SM-3D digital noise reduction, SNR>55dB, low illumination 0.5Lux (F1.8, AGC ON)

Ø Video adjustment supports: brightness, chroma, saturation, contrast, sharpness, black and white mode, gamma curve and other functions

Ø Video supports SDI, HDMI, LAN network port three output, and has one audio input port, one RS232 control port, and one 485 control port

Ø Support H.265/H.264 video compression; Support VISCA, PELCO-P/D protocol; Support automatic identification protocol

Ø Support AAC, MP3, G.711A audio compression. The audio input port is dual channel 3.5mm linear input

Ø Support Onvif, GB/T28181, RTSP, RTMP protocols, and support RTMP push mode

Ø The gimbal supports 255 preset positions, pan speed: 60°/sec, tilt speed: 30°/sec

Ø Horizontal rotation angle ±170 degrees; Vertical -30 degrees ~ +90 degrees

Ø Rotation speed: horizontal 0.1～60°/sec, vertical 0.1～30°/sec

Ø Support RTP multicast mode; Support network full command VISCA control protocol

Ø Has login browser IP web page local storage; Network port supports remote upgrade, remote restart, remote reset.

Ø Has video freezing function; Has low power sleep/wake up function. And the consumption is less than 400mW