• +86 13822483722
Your present position:Full digital economical conference system>>Full digital economical controller>>Digital conference controller RX-Q3.0
Digital conference controller RX-Q3.0
Digital conference controller RX-Q3.0
Product description:

Full digital main unit is the core component of ADCS system. It’s the important intercommunication factor of conference unit and software. Can control speech、video tracing via the navigation keyboard of the panel, and LCD.

  • Function
  • Parameters

Ø Restmoment original full digital conference technique, compliant to IEC 60914 international standard

Ø Adopt high speed RISC embedded hardware structure, more reliable, faster

Ø True full digital conference technique; digital signal for controlling and transmission; professional network cable for connecting; remote transmission won’t influence on sound quality. Distance between equipments could reach at 100m

Ø Frequency response is 20Hz – 20KHz which is close to CD sound quality

Ø Special wheel type operation. It can control all conference functions by knob control panel.

Ø 1.6 inch LCD, Chinese/English menu display, can order any language.

Ø Built-in input/output digital volum adjustment. System can adjust input/output signal.

Ø System-defined ID number to aviod the colliding of ID address.

Ø System self-checking function which can check system list and working status. Also it can position the fault.

Ø System support 60 chairman units, could specify one as chief chairman.

Ø Strong anti-interference from mobile phone;

Ø Support”PnP” to keep system’s safty and stability.

Ø Two RS-232 ports which can connect PC and central control system. The other port can connect HD video matrix.

Ø Can control HD video matrix with same code to switch the videos.

Ø Support video tracking function. It can control cameras offline to setup presetting bit.

Ø It has RS-422, RS-485 and RS-232(need convertor) video control modes. 

Ø Built in balance and non-balance audio input、output connector.

Ø MIC management mode:
   ● Limited mode, 1-6 microphones permitted to speak at the same time
   ● FIFO mode, microphone key control with override of the active microphones
   ● Apply mode, microphone key with request-to-speak registration
   ● free speech mode

Ø 5 unit output channels and support 15pcs speaking units on each channel. Working with conference extension controller, the whole system can contain 65335 units

Ø System has “Line hand in hand connection”, “Y type connection”, “distribution box connection” and “ring type hand in hand connection”

Ø System has “Conference” and “Speech” modes.

Ø Adopt 1U international standard design, Aluminium alloy case, antistatic. It can prevent 8000V static.

Ø It has ROHS, CE, FCC, CCC certification.

Ø Built-in international common use power and stabilized system.

Ø Working with conference management software to achieve more increment functions


RX-Q3.0 series

Working power

AC100~240V, 50/60Hz 2A

Working consumption

Depends on unit quantity:Single controller 1.5W ,Maximum 120W

Capacity of each way

15 microphones

System capacity

75 microphones for each controller

Transmission distance


Output interface voltage of unit


Audio input

RCA × 2       2V p-p

Audio output

RCA × 2     2V p-p 

 XLR × 1         +6dB

Output impedance


Frequency response

20 ~ 20KHz



Dynamic range


Total harmonic distortion


Edit ID for conference unit


Quantity of possible chairman units


Serial port control

A serial port, which can connect PC and central controller

Working modes

4 modes

Quantity of turnning on units

1/2/3/4/5/6 or all

Speaking limit function


Video control type


Unit connector



Dark grey

Net weight



432L x 45H x 350W mm


Suitable for 19 inch standard stand

[ Print ] [ Close ]